Using The Time Alignment - Pioneer AVH-P7600D Operation Manual

Section
15 Audio Adjustments
3 Touch a or b to adjust the speaker out-
put level.
Each time you touch a or b it increases or de
creases the speaker output level. +10  10 is
displayed as the level is increased or de
creased.
# The test tone rotates to the next speaker after
about two seconds from the last operation.
4 Touch BACK to stop the test tone out-
put.
Notes
! If needed, select speakers and adjust their ab
solute output levels. (Refer to Adjusting the
speaker output levels on the previous page.)
! To adjust the speaker output levels in this
mode is the same as making the speaker out
put levels at SP LEVEL. Both provide the same
results.

Using the time alignment

The time alignment lets you adjust the dis
tance between each speaker and the listening
position.
1 Touch A.MENU and AUDIO and then
touch Sound Setting.
2 Touch Time Alignment.
3 Touch any of the following touch panel
keys to select the time alignment.
! INITIAL  Initial time alignment (factory set
ting)
! AUTO TA  Time alignment created by auto
TA and EQ. (Refer to Auto TA and EQ (auto-
time alignment and auto-equalizing) on the
next page.)
! CUSTOM  Adjusted time alignment that
you can create for yourself
80
En
! OFF  Turn the time alignment off
! ADJUSTMENT  Adjust the time alignment
as desired
# You cannot select AUTO TA if auto TA and EQ
has not been carried out.
# You cannot select ADJUSTMENT when
neither FL nor FR is selected in POSITION.
Adjusting the time alignment
You can adjust the distance between each
speaker and the selected position.
! An adjusted time alignment is memorized
in CUSTOM.
1 Touch A.MENU and AUDIO and then
touch Sound Setting.
2 Touch Time Alignment and then touch
ADJUSTMENT.
# You cannot select ADJUSTMENT when
neither FL nor FR is selected in POSITION.
3 Touch the speaker to be adjusted.
# You cannot select speakers whose size is set
at OFF.
4 Touch a or b to adjust the distance be-
tween the selected speaker and the listen-
ing position.
Each time you touch a or b increases or de
creases the distance. 0inch  200inch is dis
played as the distance is increased or
decreased.
5 Touch ESC to return to the playback dis-
play.