Using The Position Selector; Using Balance Adjustment; Adjusting Source Levels - Pioneer AVH-P7600D Operation Manual

Section
15 Audio Adjustments

Using the position selector

One way to assure a more natural sound is to
accurately position the stereo image, putting
you right in the center of the sound field. The
position selector function lets you automati
cally adjust the speaker output levels and in
serts a delay time to match the number and
position of occupied seats.
1 Touch A.MENU and AUDIO and then
touch POSITION.
2 Touch c/d/a/b to select a listening po-
sition.
Touch one of these, c/d/a/b, to select a lis
tening position as listed in the table.
Key Display
c FL
d FR
a FRONT
b ALL
# To cancel the selected listening position,
touch the same key again.
Note
When you make adjustments for listening posi
tion, the speakers are automatically set for appro
priate output levels. You can tailor them if you
want as discussed under the heading of Adjust-
ing the speaker output levels using a test tone or
Adjusting the speaker output levels.

Using balance adjustment

You can select a fader/balance setting that
provides an ideal listening environment in all
occupied seats.
76
En
Position
Front seat left
Front seat right
Front seats
All seats
1 Touch A.MENU and AUDIO and then
touch FADER/BALANCE.
2 Touch a or b to adjust front/rear
speaker balance.
Each time you touch a or b it moves the
front/rear speaker balance towards the front or
the rear.
FAD F:25  FAD R:25 is displayed as the front/
rear speaker balance moves from front to rear.
# FAD FR: 0 is the proper setting when only two
speakers are used.
3 Touch c or d to adjust left/right speak-
er balance.
Each time you touch c or d it moves the left/
right speaker balance towards the left or the
right.
BAL L:25  BAL R:25 is displayed as the left/
right speaker balance moves from left to
right.

Adjusting source levels

SLA (source level adjustment) lets you adjust
the volume level of each source to prevent ra
dical changes in volume when switching be
tween sources.
! Settings are based on the FM tuner volume
level, which remains unchanged.
1 Compare the FM tuner volume level
with the level of the source you wish to ad-
just.
2 Touch A.MENU and AUDIO and then
touch SLA.
3 Touch a or b to adjust the source vo-
lume.
Each time you touch a or b it increases or de
creases the source volume.