to replace the battery, follow these instructions:
• Open the battery door completely by pushing the raised edge on the bottom of the
instrument. To assist with the handling of the batteries, the magnet at the end of the
MultiTool can be used to help you.
• Remove the sticky label from the + side of the new battery.
• The new battery may be inserted by using the magnetic end of the MultiTool. Ensure
that the positive (+) marking faces the positive (+) sign printed on the battery door.
Close the battery door.
If any moisture is on the battery surface, it should
be wiped off before use. When you change the
battery, it will take a few seconds before the
battery works.
To assist the handling of the batteries, the magnet
placed at the end of the tool can be used.
MultiTool
16