Programmable Keyboard; To Program The Key Layout - TOWA SX-590 Instruction Manual

PROGRAMMABLE KEYBOARD

3.24 PROGRAMMABLE KEYBOARD
All the keys except the feed key can be changed their functions. The change can be done according to
the following steps:
Control Lock: P position
1) Input the location number of the key to be changed.
2) Input the code of function to be installed to the location number.
Location Number List

TO PROGRAM THE KEY LAYOUT

Control Lock: P position
Example: Installing the function of [ TAX1] to the location number 2 on Keyboard.
Key Location: 002
New Key Code [ TAX1 ]: 033
Control Lock:
NOTE 1: When Flag 91 is "0", the program change of the key layout is ineffective.
NOTE 2: If an ineffective code number is set up on a key in the keyboard by mistake in programming,
when the key is pressed at R position after such programming, selection whether an error
occurs or nothing happens is possible. ( Selectable by main Flag 92 setting.)
9 ( Key Location )
3 digits
P position
9 0 0
( New Key Code )
3 digits
2 0 3 3
46
RET
RET