Scroll Messages; Program A Scroll Message - TOWA SX-590 Instruction Manual

1) Total Line:
2) Message:
1st : [ TUESDAY IS 10% OFF DAY! ]
2nd : [ STOCK UP AND SAVE

3.23 SCROLL MESSAGES

The following outlines the types of scrolling messages that can be programmed:
1. OFF message – Message that runs in the L position
2. MODE message – Message that runs during the idle state in P, X, Z modes
3. SALES message – Message that runs after the sales transaction
4. IDLE message 1 – Message that runs during the idle state in R mode
5. IDLE message 2 – Message that runs during the idle state in R mode
* IDLE messages 1 and 2 can be combined for 1 longer message.
Each scroll message can be programmed for a maximum of 42 characters. Messages 4 and 5 (IDLE
messages) can be combined for a maximum of 84 characters.

PROGRAM A SCROLL MESSAGE:

Control Lock: P position
6
To inputting characters using the alpha keyboard or the Alphanumeric Code Chart. If a wrong
character is entered, use the EC key to "backspace" and delete that character and then continue.
To program the OFF (Scroll Message #1) message:
6
To program the MODE (Scroll Message #2) message:
6
To program the SALES (Scroll Message #3) message:
2 Lines is selected.
8 0 2
8 1
( TUESDAY IS 10% OFF DAY! )
]
8 2
( STOCK UP AND SAVE
( The Message Number )
n: 1 - 5
( Scroll Message )
42 characters
1 RET
2 RET
RET
RET .
CHECK STUB
RET .
) CHECK STUB
RET
CHECK STUB
( Message ) CHECK STUB
42 characters (max)
( Message ) CHECK STUB
42 characters (max)
43
SCROLL MESSAGE
.
.
.
.
.
.
.