Wireless Connection Mcr-140; Other Connection - Yamaha MCR-140 Owner's Manual

Wireless connection
Playback operation with your iPod connected to the
transmitter turns the unit on automatically, and you can
enjoy the music in your iPod.
y
To turn on the unit by the playback operation of your iPod, set
POWER SAVING to NORMAL (☞ P. 11).
Note
The volume of the unit is adjusted simultaneously with the iPod.
Be careful when controlling the volume with your iPod.
■ Group setting
To operate your iPod using transmitter, you need to match
the wireless group between the transmitter and the CD
receiver (CRX-140). The default setting for both the
transmitter and the CD receiver is A2.
To select wireless group of the CD receiver
(CRX-140)
1
Press SETUP.
3
Confirm with ENTER.
5
Complete the setting.
■ Wireless connection to Subwoofer
You can use a subwoofer wirelessly with the wireless
subwoofer kit (SWK-W10, etc., sold separately). To
establish the wireless connection, set WIRELESS SW to
YES (☞ P. 11). For details, refer to the owner's manual
of SWK-W10.
MCR-140
GROUP A1
GROUP A2
GROUP B3
2
Select WIRELESS SET
menu.
4
Select the group.
6
Exit setup menu.

Other connection

■ Stationing iPod
Station or remove your iPod whenever you want.
y
Your iPod is automatically charged when your iPod is set in the
iPod dock/charging cradle, even if the unit is in standby mode.
Note
The unit is compatible with iPod (5th generation), iPod classic,
iPod nano, and iPod touch.
MCR-040
Note
To secure the connection, attach a compatible Dock Adapter
supplied with the iPod or an iPod Universal Dock Adapter
(sold separately), and remove the protective case covering
your iPod.
MCR-140
Station your iPod in the charging cradle when you want to charge
your iPod. You can also control your iPod with the remote control
when your iPod is in the charging cradle.
■ Connecting USB
Connect or remove your USB device whenever you want.
y
USB device is automatically charged when it is connected to the
unit, even if the unit is in standby mode.
Notes
• This unit supports USB mass storage class devices (e.g., flash
memories or portable audio players) using FAT16 or FAT32
format.
• Do not connect devices other than USB mass storage class
devices (such as USB chargers or USB hubs), PCs, card
readers, an external HDD, etc.
CONNECTION
Dock Adapter
iPod dock
Transmitter
Charging
cradle
5
En