Baxi Chester 0581901 Installer And Owner Manual page 9

INSTALLER AND OWNER GUIDE
Fit the new bulb.
Fit the new bulb by screwing it
!
clockwise (See figure 5).
Relocate the fuel effect.
!
Relocate the black metal strip. The
!
folded edge should be on the bottom.
Secure using the three screws
!
removed previously.
2. My stove is switched on but there
is no light, fan or heat.
The first thing to do is check the wall
socket. To do this plug in a known
working appliance. If the appliance you
have plugged in works then there is a
good chance that the problem lies with the 13 Amp fuse in the stove plug. If either fuse
or socket is suspected, have them checked by an electrician.
3. My stove is on but there is no heat.
Check that the thermostat on the stove is set above ambient room temperature.
!
Alternatively a cut out device is fitted to the stove to prevent damage due to over
!
heating. If it operates due to an obstruction in the airflow, the stove must be turned off
and allowed to cool for 15 minutes and the obstruction removed before restarting.
4. I Have a problem that is different to those in the previous examples 1- 3.
Below is a list of Useful Telephone numbers
For general advice about your stove:
BAXI FIRES DIVISION TECHNICAL HELPLINE
To report faults or arrange for your stove to be serviced:
BAXI FIRES DIVISION SERVICE
For sales or product information:
BAXI FIRES DIVISION SALES
CALLERS IN THE REPUBLIC OF IRELAND
Call 0044 8706 061 065
©
Baxi Heating U.K. Limited 2006.
Figure 5. Bulb replacement
08706 090 081.
08706 061 067.
Page 9
08706 061 065.