Test The Coverage Area; Secure The Camera - Bushnell 119734C Instruction Manual

CAMERA OPERATION (continued)

3. Test the Coverage Area

One of the 119734C Ninja Cam's most useful features is the ability to test
the coverage area.
• After mounting the camera, open the front housing and slide
the Power switch to the "ON" position. Press the SETUP button if
necessary to enter the Setup Menu.
• The PIR indicator light below the lens will blink when you have
entered the coverage area.
• Adjust the camera position as needed and repeat the test until the
desired coverage area is achieved.
• Press the SETUP button again when you are finished using the test
mode-the camera will be "sleeping" and waiting for the PIR sensor to
trigger the first photo or video capture.

4. Secure the Camera

A standard padlock may be used in the camera's lock hole to secure it and
prevent theft.
13