Register Handset To Base - BT SYNERGY 3105 User Manual

5672 BT Synergy 3105 UG [4]
Additional handsets & bases
33 Section
Up to 5 handsets can be registered and operated from
any one BT Synergy 3105 base.
With additional handsets, you can make internal calls
between two handsets while a third is making an
external call.
Each handset can be registered on up to 4 bases.

Register handset to base

Make sure the handset is close to the base.
At the base:
1. Press and hold
about 10 seconds) then release.
At the handset:
2. Press then scroll
11/11/03
BT Synergy 3105 – Edition 4 – 11.11.03 – 5672
until you hear two beeps (after
Page
to REGISTER and press
3:51 PM Page 33
IMPORTANT
Each additional handset you buy
must be registered with the base.
Remember to charge the batteries
of new handsets for at least 16
hours before use. If the display
shows NOT REG, and
your handset is not yet registered
with the base.
Your handset is supplied
pre-registered as Handset 1 to its
base (Base 1).
If you have purchased a Multiple
pack, the additional handsets
supplied will be pre-registered as
Handset 2, Handset 3, Handset 4.
All handsets will be pre-registered
to Base 1.
.
33
is flashing,