Teac AG-10D Service Manual page 7

Pin No. Symbol
46 T_MUTE
47 SR_MUTE
48 SW_MUTE
49 C_MUTE
50 F_MUTE
51 VIDEO_S2
52 VIDEO_S3
53 CINEMA ,EQ
54 DSP_MUTE
55 CS49326RST
56 ROM2
57 ROM30
58 ROM3
59 AUTOBOOT
60 SUB SUM
61 SC_MUTE
62 SPK RELAY
63 CONT 2506
64 OSD CE
65 OSD CLK
66 OSD DATA
67 CS 4112
68 POWER LED2
69 STANDBY LED/RELAY/POWER LED Output to ST/BY LED, STBY Relay and POWER LED. (At "H", it is active.)
70~85 S1~S15
86 N.C
87 N.C
88 N.C
89 VDD
90 N.C
91~100 G1~G10
Output for tuner mute. (At "L", it is active.)
Output for surround channel mute. (At "L", it is active.)
Output for sub woofer channel mute. (At "L", it is active.)
Output for center channel mute. (At "L", it is active.)
Output for front channel mute. (At "L", it is active.)
Video select 1,2,3
Video select 1,2,3
Output for cinema eq (At "H", it is active.)
Output for DSP mute. (At "L", it is active.)
Reset signal output to CS4926.
Signal output to M27W201 .
Signal output to M27W201 .
Signal output to M27W201 .
Output for DSP AUTOBOOT
Output for sub woofer Summing. (At "L", it is active.)
Output for center channel mute. (At "L", it is active.)
Output for Speaker Relay ON/OFF (At "H", it is active.)
Output for NJM 2506 IC
Output for chip enable of M35010 OSD IC
Output for clock of M35010 OSD IC
Output for data of M35010 OSD IC
Chip select signal output to AK4112
Output for POWER LED Dimmer.
GRID FL PORT
Not used!
Not used!
Not used!
+5V power supply.
Not used!
GRID FL PORT
−7−
Description