Turning the Computer On and Off
Turning the computer on
1
Install the battery and connect the AC adapter.
(Refer to the Installation Guide.).
2
Lift the LCD panel up.
3
Press the Power button to turn the computer on.
4
Power button LED is lit while the computer is turned
on.
If you press and release the Power button on
■
the computer when it is on, the computer enters
Sleep mode.
Note
When running the computer on battery power, the
■
LCD brightness is dimmed automatically to save
battery power.
Press the Fn+ (
brightness. p. 46
When turning the computer on for the first time,
■
the Register Windows screen appears. You can
use the computer after registering your user
information.
) key to increase the LCD
Turning the computer off
1
Click the Start (
2
Click the (
) and click on Shut down.
The computer will shut down.
1
Before Using the Power Button
Since the Power Icon is set to power saving mode,
selecting Start > Power Button (
Note
the computer to enter Sleep mode.
To shut down the computer by clicking this icon,
refer to the descriptions for Setting up Start menu
power button of the Control Panel. p. 86
If the system cannot be shut down due to a system
error, turn it off by pressing and holding the Power
Button for a minimum of 4 seconds.
Caution
Please note that turning the computer off by this
method may cause a system problem. Thereafter,
when turning the computer back on, the disk
checking program may launch to check for and
correct any disk errors.
42
) button on the taskbar.
2
Power
Button
), will cause
3