Initializing The Security Platform - Samsung NP-P560-AA03US User Manual

Initializing the Security Platform

You have to initialize the Security Platform after installing
the TPM Host software.
The procedures for initializing the Security Platform are
described below.
1
Click Start > All Programs > Infineon Security
Platform Solution > Security Platform
Management > User Settings. (Alternatively
double-click the Security Platform (
Taskbar.)
2
If a window appears asking whether you want to start
The Infineon Security Platform Initialization Wizard,
click OK.
In the start screen, click Next.
If the Trusted Platform Module activation screen
appears, check TPM State in the BIOS setup and make
sure TPM State is set to Enable & Activate. For how
to check TPM State in the BiOS setup, refer to the
'Initializing a TPM chip' section.
3
Select Initialize a new Security Platform and click
the Next button.
) icon in the
4
Enter a password and click the Next button.
132