Samsung NP-P560-AA03US User Manual page 127

3
For the integrated password authentication step,
complete the following.
Enter the Windows user ID and logon password and
click the Next button.
If you do not enter a logon password, the integrated
password authentication function will be permitted
to anyone; it is therefore recommended entering a
logon password.
Creating a user logon password
Select Start > Control Panel > User Accounts >
■
Create password for user account.
Enter a password in the New Password field, and re-
■
enter the password in the Confirm New Password
field. Click Create Password. A password has been
created.
4
The fingerprint registration begins. Select the finger
to be registered and click the Next button.
5
Register the fingerprint by placing your finger over
the fingerprint identification sensor and placing it
down slowly. Repeat this at least 3 times until the
next screen appears automatically.
6
Place the registered finger over the fingerprint
identification sensor again and click the Next button.
7
A window appears asking if you want to register an
additional fingerprint. Click No to proceed to the next
window. If you click Yes, Steps 5~7 are repeated.
8
Proceed with the settings and click the Next button.
9
When the user profile backup instruction window
appears, read the contents and click on Backup
Now. Specify a path to save the user profile to and
save the name. When the backup file password
window appears, enter a password and click the OK
button.
What is a user profile backup?
This is a function for backing up the OmniPass
information (fingerprint and user account information)
registered on a computer so that the information can be
used on another computer. For information on how to
use a backed up user profile on another computer, refer
to the Help section.
10
Click Done. Registering information for using the
fingerprint identification and integrated password
authentication functions has been completed.
126