Maintenance And Service; Specifications - JBL CONTROL X Owner's Manual

WALL-MOUNTING THE SPEAKERS USING THIRD-PARTY
WALL BRACKETS
Each JBL Control X speaker contains a 3/8"-16 threaded insert on the
back to facilitate the use of third-party wall brackets. Please consult
your JBL dealer or distributor for recommendations.
Note: Customer is responsible for proper selection and installation of
appropriate third-party wall brackets.
DISTANCE BETWEEN EACH SPEAKER
For optimal stereo imaging, 6–8 feet (1.8m – 2.4m) is recommended
between each speaker. If you require a wider space or distance, be
sure to run a L + R (summed mono) signal from your amplifier or
receiver to each speaker if your equipment offers this option.

MAINTENANCE AND SERVICE

The speaker enclosures may be cleaned using a soft cloth to remove
fingerprints or to wipe off dust.
All wiring connections should be inspected and cleaned or remade periodi-
cally. The frequency of maintenance depends on the metals involved in
the connections, atmospheric conditions and other factors, but once per year
is the minimum.
In the event that your system ever needs service, contact your local JBL
dealer or distributor, or visit www.jbl.com for a service center near you.
HARMAN International Industries, Inc.
8500 Balboa Boulevard, Northridge, CA 91329 USA
© 2015 HARMAN International Industries, Incorporated. All rights reserved.
JBL is a trademark of HARMAN International Industries, Incorporated, registered in the United States and/or other countries.
Features, specifications and appearance are subject to change without notice.
4

SPECIFICATIONS

Low Frequency Transducer:
High Frequency Transducer:
Recommended Amp Power:
Frequency Response (-3dB):
Sensitivity:
Nominal Impedance:
Crossover Frequencies:
Inputs:
Dimensions (H x W x D):
Weight:
Features, specifications and appearance are subject to change without notice.
*The recommended amplifier power rating will ensure proper system headroom to
allow for occasional peaks. We do not recommend sustained operation at the maximum
power level.
5.25" (133mm) polypropylene
graphite-filled cone
1" (25mm) CMMD Lite dome / High
®
Definition Imaging Waveguide
20 – 100 Watts
90Hz – 20kHz (anechoic)
(2.83V@1m) 87dB
8 Ohm
2300Hz – 12dB/octave
Gold-plated 5-way binding posts
9-1/4" x 6-1/2" x 6-1/4"
(235mm x 165mm x 158.8mm)
5.8 lbs (2.63 kg)
www.jbl.com
TR00498_B