Two-Factor Authentication - Motorola APX 1000 MODEL 3 User Manual

Note:
Power loss and power down are different
activities, power down occurs when the user
intentionally powers off the radio, power loss is
when the battery dies or is removed from the
unit.

Two-Factor Authentication

Two-Factor Authentication is an extension of existing
ARS and TMS operation. This feature allows you to
authenticate yourself with a username, unit ID,
password and passcode.
The purpose of this feature is to allow the sender of a
text message to address a specific user of the radio,
so the message is delivered to the user, not to the
radio which may have any user using it at the time.
Secondly, this feature supports query authentication
requirements so the query service knows which user
originated a query.
You can still send text messages without logging in
as a user. The user login feature only enables the
recipient of your message to identify you as the
sender by assigning a username to your message.
Note:
A predefined username that is set more than
the maximum allowed characters is an invalid
name.
Logging in via the Two-Factor Authentication
1 Perform one of the following actions:
• Press the preprogrammed User Login button.
•
or to User, and press the Menu Select
button directly below User.
The display shows the User Login screen.
2 Perform one of the following actions:
•
or to [ID Entry] and press the Menu
Select button directly below Edit. A blinking
cursor appears. Use the keypad to type or edit
a username. Press the Menu Select button
directly below Ok to submit.
• or to scroll through the list of predefined
usernames. Press the Menu Select button
directly below Sel to select the predefined
username.
• Press and hold or
list of predefined usernames at a fast scroll
to scroll through the
99
English