dji Mavic pro User Manual page 14

Mavic Pro User Manual
Smart RTH
Use the RTH button on the remote controller or tap the RTH button in the DJI GO app and follow the on-
screen instructions when GPS is available to initiate Smart RTH. The aircraft status indicator will blink to
display the current status. The aircraft will sense and avoid obstacles on its flight path during Smart RTH.
The aircraft may choose to navigate or hover in place to avoid collision. User can manually navigate the
aircraft to avoid obstacles if the Forward Vision System is disabled or if light levels are low. The pilot can
also immediately exit Smart RTH using the Flight Pause Button on the remote controller or by pressing the
Stop icon in the DJI GO app.
Landing Protection will activate during Smart RTH, Precision Landing and when using Auto Landing in the
DJI GO app:
1. When Landing Protection determines that the ground is suitable for landing, the Mavic Pro will land
gently.
2. If Landing Protection determines that the ground is not suitable for landing, the Mavic Pro will hover and
wait for pilot confirmation.
3. If Landing Protection is not operational, the DJI GO app will display a landing prompt when the Mavic
Pro descends below 0.5 meters. Pull down on the throttle or use the auto landing slider to land.
Low Battery RTH
The low battery level failsafe is triggered when the DJI Intelligent Flight Battery is depleted to a point that
may affect the safe return of the aircraft. Users are advised to return home or land the aircraft immediately
when prompted. The DJI GO app will display a notice when a low battery warning is triggered. The
aircraft will automatically return to the Home Point if no action is taken after a ten-second countdown. The
user can cancel the RTH procedure by pressing the RTH button on the remote controller. The thresholds
for these warnings are automatically determined based on the aircraft's current altitude and distance from
the Home Point.
The aircraft will land automatically if the current battery level can only support the aircraft long enough
to descend from its current altitude. The user can still use the remote controller to alter the aircraft's
orientation during the landing process.
The Battery Level Indicator is displayed in the DJI GO app, and is described below:
Critical Low battery level warning
(Red)
14
©
2016 DJI All Rights Reserved.
Sufficient battery level
(Green)
Low battery level
warning (Yellow)
Power requires
to return home
Battery level Indicator
Remaining flight time
12:29