Planet Networking & Communication HDVR-430 User Manual page 56

When in full digital mode, only RS485 device is shown below.
Protocol
Address
Baud Rate
Data Bits
Stop Bits
Parity
When analog channel exists, PTZ and RS485 will be shown in PTZ setting.
If device is in digital (NVR) mode, it will show RS485 only.
Picture 5.29 RS485 Device
Choose related protocol of brand model (e.g. Vista)
Set with corresponding address, default is 1
Choose baud rate that related device uses; default is 9600
Include 5-8 options, default is 8
Include 2 options, default is 1
Include odd check, even check, mark check, space check
Default: none
56
Hybrid Digital Video Recorder
HDVR series