Planet Networking & Communication HDVR-430 User Manual page 37

MD Interval
Alarm Output
OutDelay
Record Channel
Tour
PTZ Activation: Set the PTZ activation when the alarm is turned on.
Only one alarm signal is turned on even there are several
motion detection signals in the set interval.
Start the external equipment of corresponding linkage alarm
when the motion detection alarm is turned on.
Delay a few moments and stop when the alarm state is turned
off. The range is 10~300 seconds.
Choose the recording channel (multiple options supported).
Trigger the video signal when the alarm is turned on.
It means that the selected channel is single window alternate
patrol preview. The interval is set in the [Main Menu]>[System]
> [Tour].
Picture 5.5 Region
Picture 5.6 Set the Time Section
37
Hybrid Digital Video Recorder
HDVR series