Planet Networking & Communication HDVR-430 User Manual page 31

GUI display
configuration
RS485 device
Serial port
configuration
(RS232)
Hard disk
management
management
Online user
Output adjust
Advanced
Automatic
maintenance
Upgrade
Device info
Import/Export
System
Hard disk
information
information
Set channel name, time display, record status, alarm
status, deflicking, transparency and resolution.
Set channel, PTZ protocol, address, baud rate, date bit,
stop bit and parity
PTZ
Set protocol type, address, baud rate, data bit, stop bit
and parity
Set serial port function, baud rate, data bit, stop bit and
parity
Tour Set patrol mode and interval time
Set channel type, check channel status and configure
Digital
the digital channel, etc.
Set appointed hard disk as read-write disk, read-only
disc or redundant disk, format hard disk, resume date
and so on
User Modify user, group or password. Add user or group.
Delete user or group.
Break the connection of the existing login user. After
breaking connection, the account is locked until booting
up again.
Adjust upside, downside, nearside, starboard distance,
black vertical and horizontal parameters.
Settings for automatic reboot system and auto-delete old
files.
Factory default settings for general setup, encode setup,
recording setup, alarm setup, network setup, network
Restore
service, netservice, serial port setup and user
management
Upgrade firmware with external device (like USB)
Device configuration and information
Export the device's log or configuration to external
device (like USB flash disk); input the configuration with
external device (like USB flash disk).
Display hard disk capability and recording time
Hybrid Digital Video Recorder
Only analog channel can set channel name,
region cover, time title, and channel title fold.
Analog / Hybrid
configuration setting.
Full digital mode shows RS485 Device
setting.
Only analog channel has black vertical and
horizontal margins.
31
HDVR series
mode shows PTZ