Table of Contents
Advertisement
Available languages
Available languages
5.12. HOLD-Button
The DATA-HOLD function allows the meter to "freeze" a measurement for
later reference.
Press the "HOLD"-button to freeze the display, the "HOLD" indicator will
1.
appear.
Press the "HOLD"-button to return to normal operation.
2.
5.13. Flashlight
Press and hold the "
turn the flashlight off.
6. Maintenance
Your digital multimeter is a precision electronic device. Do not tamper with the
circuitry. To avoid damage:
a)
Never connect more than 600 V DC or AC
Never connect a source of voltage with function switch on Ω position
b)
and
- position.
c)
Never operate the DMM unless the battery cover is in place and fully
closed.
d)
Battery replacement should only be done after the test leads have been
disconnected and power is off.
"-button to turn the flashlight on. Release the button to
-28-
rms
Advertisement
Table of Contents
