TRENDnet TEG-424WS User Manual page 21

Hide thumbs Also See for TEG-424WS:

Table of Contents

Enlarged version

Step3: Create VID 02 and set port 1~5 to "Untag Port" member, then apply setting.

Step4: Create VID 03 and set port 1, 6~9 to "Untag Port" member, then apply setting.

Step 5: Set PVID Port 2~9 PVID value to below list:

Asymmetric VLAN's PVID setting example

Note:

1. Untag port VLAN member can exist in different VLAN groups simultaneously when

Asymmetric VLAN function enabled.

2. You must create VLAN and add VLAN member first that just can set PVID setting.

3. You must change Untag Port PVID to another existent VLAN ID that just can

remove Untag port member from VLAN group

Table of Contents