Suunto ZOOP User Manual page 55

17. Install the dive computer back into the console or boot and reassemble the strap.
The instrument is now ready for use.
Wrist model:
•
Assembling into the boot: First insert the longer strap in its hole in the front
of the boot and then the dive computer into its cavity in the boot starting at
the back end. Then snap also the long strap end of the instrument into the
boot. Stretch the boot as needed.
•
Assemble the shorter part of the strap. Use the spring bar tool or small
screwdriver to compress the spring bars. Make sure that the spring bars get
fully seated so they will not come off their holes.
Console model:
• Refit the dive computer in the console according the instructions of the console.
Check after the first dives for possible moisture under the transparent battery
compartment lid, indicating a leak.
Complete Strap
Short Strap with buckle
Spring Bar (K5588)
Long Strap (K5592)
Fig. 5.1 Instrument parts. The code after the name stands for spare part order number.
CAUTION!
(V5841)
(V5836)
Fig. 5.2 Opening of the securing ring.
Securing Ring (V5844)
Battery Compartment Lid
with buzzer (V5843)
O-Ring (K5664)
Battery Retainer (V5842)
Battery (K5597)
53