Download Print this page

SamplexPower RC-300 Owner's Manual page 4

Lcd panel remote control for use with pst-3000-12/24 and pst-300s-12e/24e inverters.

Advertisement

When the inverter is switched ON using the ON/OFF Push Button (1), the LCD
screen displays information as follows:
It takes 2 to 6 sec for booting / initialization. During this time, all the above
6 parameters will be displayed as "0"
If the load is > 6W, all the above 6 parameters will be available for display after
end of booting / initialization period
If the AC output power is less than 6W, parameters "AC output current in A",
"Active AC output power in Watts, W", "Apparent Output AC Power in Volt Amps,
VA" and "Power Factor, PF" will not be displayed (will be displayed as "0"). This is
necessary because at power output < 6W, the noise on the output side may be com-
parable to the low value of the load and the logic may not be able to differentiate
noise from load and hence, may display wrong values for these parameters
3.4 Power Saving / Sleep Mode in the LCD Display
To save power, the LCD display will remain ON for 3 minutes from the time the
Display Push Button (2) is pressed and will then switch OFF into Sleep Mode. To
wake up, press the Display Push Button (2).
65
65
Pure
Sine Wave
Pure
Sine Wave
Front View
Front View
8,5
8,5
32,5
32,5
4
32,5
32,5
R2
4
R2
48
48
32,5
32,5
32,5
32,5
8,5
8,5
15
15
Back View
Back View
Fig. 1 Remote Control RC-300 - Layout and Dimensional Drawing
LEGEND
LEGEND
1. Power ON/OFF Push Button
1. Power ON/OFF Push Button
2. Push Button to Change Display Screen
4 | SAMLEX AMERICA INC.
2. Push Button to Change Display Screen
3. LCD Screen
3. LCD Screen
4. LED - "Overload"
4. LED - "Overload"
5. LED - "Over Temp"
5. LED - "Over Temp"
6. LED - "Power"
3
3
4
OVER
OVER
POWER
LOAD
TEMP
4
OVER
OVER
POWER
LOAD
TEMP
6
5
MODEL RC-300
6
5
MODEL RC-300
110
110
Overall Depth: 25.5
Overall Depth: 25.5
1 1
1 1
7
7
98
98
80
80
Front View
8,5
32,5
32,5
4
48
32,5
32,5
8,5
15
Back View
LEGEND
1. Power ON/OFF Push Button
2. Push Button to Change Display Screen
3. LCD Screen
2
4. LED - "Overload"
2
5. LED - "Over Temp"
DISPLAY
6. LED - "Power"
DISPLAY
7. RJ-50 Modular Jack
1
1
Note: All dimensions in mm
4 32,5
R2
4 32,5
R2
32,5
32,5
15
15
4
OVER
OVER
LOAD
TEMP
Pure
MODEL RC-300
Sine Wave
110
1 1
R2
98
80
POWER
6
5
Overall Depth:
7

Advertisement

loading