Static Ip - D-Link DIR-456U User Manual

Hide thumbs Also See for DIR-456U:
Table of Contents

Advertisement

Section 3 - Configuration
Choose this Internet connection if your ISP assigns you a static IP address.
IP Address:
Subnet Mask:
Default Gateway:
Primary DNS Server:
Secondary DNS Server:
MTU:
MAC Address:
D-Link DIR-456U User Manual
Enter the IP address assigned to
your network connection.
Enter the subnet mask.
Enter the default gateway.
Enter the primary DNS server.
Enter the secondary DNS server.
You may need to change the
Maximum Transmission Unit (MTU)
for optimal performance. The default value is 1500.
The default MAC Address is set to the Internet port's physical interface MAC address on the Broadband Router.
It is not recommended that you change the default MAC address unless required by your ISP. You can use
the Clone Your PC's MAC Address button to replace the Internet port's MAC address with the MAC address
of your Ethernet card.
Click Save Settings to save your changes, or click Don't Save Settings to discard your changes.

Static IP

16

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents