Optical Drive - Panasonic CF-20 Operating Instructions Manual

Preparation
l Prepare the following items:
Ÿ Recovery Disc (
disc.)
( Reference Manual "Create a Recovery Disc")
Ÿ Commercially available optical drive
l Remove all peripherals and SD memory card etc. (except for the commercially available
optical drive).
l Connect the AC adaptor and do not remove it until installation is complete.
1 Connect the commercially available optical drive to the USB port.
2 Start the Setup Utility.
A Click (Start) - [Settings] - [Update & security] - [Recovery].
B Click [Restart now] under "Advanced startup".
C Click [Troubleshoot] - [Advanced options] - [UEFI Firmware Settings] - [Restart].
Turn on the computer, and press F2 or Del while [Panasonic] boot screen is displayed.
l If the [Panasonic] boot screen is not displayed, turn on the computer while holding down
F2 or Del .
l If the password is requested, enter the Supervisor Password.
3 Write down all of the contents of the Setup Utility and press
At the confirmation message, select [Yes] and press Enter .
4 Check the [UEFI Boot] setting of the Setup Utility.
[UEFI Boot] should be set to as follows.
When the recovery disc for Windows 10 is used : [Enabled]
When the recovery disc for Windows 7 is used : [Disabled]
5 Set the Recovery Disc into the DVD drive or commercially available

optical drive.

6 Press .
F10
At the confirmation message, select [Yes] and press Enter .
Computer will restart.
7 Press or
F2
The Setup Utility starts up.
l If the password is requested, enter the Supervisor Password.
8 Select the [Exit] menu, then select DVD drive or commercially avail-
able optical drive in [Boot Override] and press
The computer will restart.
9 Click [Recovery].
10 Click [Reinstall Windows] and click [Next].
11 At the confirmation message, click [YES].
12
At the License Agreement screen, click [Yes, I agree to the provisions
above and wish to continue!] and click [Next].
13 Click [Disk 0].
USB memory device can also be used as a recovery
while [Panasonic] boot screen is displayed.
Del
.
F9
.
Enter
29