Using Recovery Disc - Panasonic CF-20 Operating Instructions Manual

Table of Contents

Advertisement

Installing Software
10
If the option is displayed, select the setting and click [Next].
l [Initialize and reinstall Windows to the whole Disk]
Select this option when you want to install Windows to the factory default. After instal-
lation, you can create a new partition. For how to create a new partition, refer to "To
change the partition structure" ( page 19)
l [Reinstall Windows to the OS related partitions]
Select this option when the flash memory has already been divided into several parti-
tions and you want to keep the partition structure. For how to create a new partition,
refer to "To change the partition structure" ( page 19).
*1
This does not appear if Windows cannot be installed to the recovery partition and the area usable by
Windows.
11
12
Select OS (32bit or 64bit) and click [OK].
<For MUI OS model>
Select language and system type (32bit or 64bit), then click [OK].
13
14
Installation starts according to the instructions on the screen. (It will take approximately
l Do not interrupt installation, for example by turning off the computer or performing other
operation.
Otherwise installation may become unavailable as Windows may not start up or the
data may be corrupted.
15
When Ending process screen is displayed, click
/
16
Turn on the computer.
l If the password is requested, enter the Supervisor Password.
17
Perform the "Setup Windows" ( page 16).
18
Start the Setup Utility and change the settings as necessary.
n Using Recovery Disc
Use the Recovery Disc in the following conditions.
Ÿ You have forgotten the administrator password.
Ÿ Installation is not complete. The recovery partition in the flash memory may be broken.
<Only for Windows 7 downgrade model>
Ÿ
To change OS from Windows 7 to Windows 10, or vice versa.
NOTE
To change OS from 32 bit to 64 bit, or vice versa, install OS using the recovery par-
l
tition in the SSD.
28
Click [Next].
At the confirmation message, click [YES].
<For localized OS model>
Click [Recovery ALL Partitions.].
At the confirmation message, click [YES].
several tens of minutes /
[OK] to turn off the computer.
*1
20 minutes.)
[Shutdown.]

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents