6. Insert the flat end of the keyboard multi-tool into the sides of the keyboard as shown to push the
keyboard frame backward. Ensure that there is no gap between the keyboard frame and keyboard bezel.
When installing:
Ensure that the connectors are attached firmly.
1030 M.2 solid-state drive
For access, remove this FRU:
•
"1010 Base cover assembly" on page 60
Attention:
• Do not drop the drive or apply any physical shock to it. The drive is sensitive to physical shock. Improper
handling can cause damage and permanent loss of data.
67
.
Chapter 9
Removing or replacing a FRU