Table of Contents
Advertisement
1030 M.2 solid-state drive
For access, remove this FRU:
•
"1010 Bottom cover" on page 56
Attention:
• Do not drop the drive or apply any physical shock to it. The drive is sensitive to physical shock. Improper
handling can cause damage and permanent loss of data.
• Before removing the drive, have the user make a backup copy of all the information on it if possible.
• Never remove the drive while the system is operating or in suspend mode.
Removal steps of the M.2 solid-state drive
Step
Screw (quantity)
1
M2 × L3 mm, flat-head, nylon-coated (1)
When installing: Ensure that the M.2 solid-state drive is firmly attached.
Torque
Color
Black
0.181 Nm
(1.85 kgf-cm)
.
Chapter 7
Removing or replacing a FRU
59
Advertisement
Table of Contents
