Disassemble The Lcd Module; Remove The Lcd Bezel - Lenovo N22–20 Hardware Maintenance Manual

Figure 16. Remove the system board
Step 3. Remove the DC-in cable.
Figure 17. Remove the DC-in cable
Refer to Table 12 "Part numbers for FRUs (CRUs)" on page 43 to look up the Lenovo part numbers of the
following replacement parts:
System board
DC-in cable
Base cover

Disassemble the LCD module

The LCD module as a whole is not a FRU. Instead, it contains FRUs as its components. Before disassembling
the LCD module, make sure it has been detached from the base cover. Refer to "Remove the LCD module"
on page 31 for instructions.

Remove the LCD bezel

Step 1. Pry the six rubbers
1
off the LCD bezel.
.
Chapter 4 Removing a FRU or CRU
33