Lenovo N22–20 Hardware Maintenance Manual page 43

Figure 24. Remove two screws
Step 3. Unplug the LCD & Camera cable from the camera board.
Figure 25. Unplug LCD & camera cable
Step 4. Remove the LCD & camera cable or the camera assembly.
If you need to replace the LCD & camera cable, tear if off the LCD base cover.
If you need to replace the camera assembly, remove the two screws that secure the camera on
the LCD base cover.
Figure 26. Remove the camera module
Refer to Table 13 "Part numbers for LCD FRUs" on page 44 to look up the Lenovo part numbers for
replacement parts for:
Camera assembly
LCD & camera cable
.
Chapter 4 Removing a FRU or CRU
37