Lenovo 510S Hardware Maintenance Manual page 58

Step 19. Lift up the middle frame to remove it.
Step 20. To install the new the LCD panel module:
The new LCD panel module including:
a. Align the new LCD panel with the middle frame.
b. Secure the new LCD panel to the middle frame with twenty one screws.
c. Connect the LVDS, touch and converter cables to the connectors in the new LCD panel.
d. Reattach the pull down assembly to the chassis.
e. Reattach the speaker system.
f. Reattach the wind shielding.
g. Reattach the motherboard.
h. Connect the LVDS cable, touch cable, pull down assembly cable and speaker system cable to
the corresponding connectors on the motherboard.
i. Reattach the system fan.
j. Reattach the solid state drive.
k. Reattach the power switch board.
l. Connect the system fan cable, solid state drive cable and power switch board cable to the
corresponding connectors on the motherboard.
m. Reattach the EMI cover to the chassis.
n. Reattach the stand holder to the chassis.
o. Reattach the rear cover.
52
ideacentre All-In-One 510S Computer Hardware Maintenance Manual
1. LCD panel
2. Touch control board
3. Converter