Lenovo 510S Hardware Maintenance Manual page 53

Step 3. Disconnect all cables attached to the computer. This includes power cords, input/output (I/O)
cables, and any other cables that are connected to the computer. Refer to Locating connectors,
controls and components to locate the various connectors.
Step 4. Remove the stand base. Refer to Removing the stand base.
Step 5. Remove the rear cover. Refer to Removing the rear cover.
Step 6. Remove the stand holder. Refer to Removing the stand holder.
Step 7. Remove the EMI cover. Refer to Removing the EMI cover.
Step 8. Remove the motherboard. Refer to Replacing the motherboard.
Step 9. Remove the pull down assembly. Refer to Removing the pull down assembly.
Step 10. Remove the two screws that secure camera and USB board to the pull down assembly cover.
Step 11. Remove the pull down assembly bracket.
Step 12. Pull the USB board and camera assembly out of the pull down assembly cover.
.
Chapter 8 Replacing hardware
47