RED RAVEN Operation Manual page 155

R E D R AV E N O P E R AT I O N G U I D E
IMAGE APPEARS GRAINY
SYMPTOM
Image or footage appears grainy.
POTENTIAL RESOLUTIONS
 Perform a black shading calibration before recording additional clips. For more information, go to
Calibration" on page
 Check the histogram to ensure proper exposure. Noise occurs if an image is overexposed or underexposed.
For more information, go to
 Use the lowest REDCODE
go to "REDCODE" on page
 Use a higher resolution.
 Use Adaptive fan mode to regulate the camera temperature. Noise occurs when the temperature from the
applied calibration map is not in sync.
BLACK AND WHITE IMAGE
SYMPTOM
The display shows that an image is in black and white, and the menus are still in color.
POTENTIAL RESOLUTIONS
 Go to Menu > Settings > Look > Color, and check the Saturation setting. If the Saturation setting is set to a
low value, change the Saturation to a higher value.
 Reset your camera's default settings. For more information, go to
INCORRECT COLOR TEMPERATURE
SYMPTOM
The camera color temperature is off and the image looks warmer or cooler than normal.
POTENTIAL RESOLUTIONS
 Perform an auto white-balance. For more information, go to
 Perform a black shade calibration. For more information, go to
COPYRIGHT © 2016 RED.COM, INC
100.
"Stills Mode" on page
compression possible for the settings you have selected. For more information,
®
44.
47.
"Reset Defaults" on page
"Color Temperature" on page
"Sensor Calibration" on page
"Sensor
105.
71.
100.
955-0127_V6.3, REV-E | 155