Connect Ard300 To Ar5000/5000A/5000A+3 - AOR ard300 User Manual

6. Connect ARD300 to AR5000/5000A/5000A+3

Use the supplied IF, (open-end) DC and audio cables.
First, the receiver's IF filter needs to set properly:
Press the FUNC key followed by the kHz key.
•
Press the UP key twice.
•
Rotate the sub dial to select EXT-IF 1.
•
Validate with the ENT key.
•
Each unit needs its own power source; therefore you will need to supply the power
source for ARD300. If you happen to own the AR8600MK2 receiver, you can use its AC
adapter AA8600. (The AA2300 adapter of AR2300/5001D/6000 can be used as well)
Connect ARD300 to your power supply by using the supplied "open-end" DC
•
cable.
Connect one end of the supplied IF cable to the IF OUT socket of the receiver,
•
and the other end to the IF IN socket of ARD300.
If you would like the ARD300 internal speaker to output both the analog signal
•
audio and the decoded digital audio, connect the supplied audio cable to the
receiver's EXT SP socket and the SP IN socket of ARD300.
Proceed to chapter 10 "Receiver menu setup of ARD300".
11