Connect Ard300 To Ar8600Mk2 - AOR ard300 User Manual

5. Connect ARD300 to AR8600MK2

Use the supplied IF, DC and audio cables.
The power supply used is the AR8600MK2 AC adapter, which will power both units
simultaneously.
Connect one end of the supplied IF cable to the IF output of the receiver, and
•
the other end to the IF IN socket of ARD300.
Connect one end of the supplied DC cable to the DC 12V socket of the
•
receiver. And the other end to the DC 12V OUT socket of ARD300.
If you would like the ARD300 internal speaker to output both the analog signal
•
audio and the decoded digital audio, connect the supplied audio cable to the
receiver's EXT SP socket and the SP IN socket of ARD300.
At last, plug in the AC adapter's DC plug into the DC12V IN socket of ARD300.
•
Proceed to chapter 10 "Receiver menu setup of ARD300".
7