HP Smart Array P800 User Manual page 6

Dimensions (excluding bracket)
Type of drives supported
Maximum power required
Temperature range
Relative humidity
(noncondensing)
RAID levels supported
Type of edge connector
PCIe transfer rate
Number of SAS ports
Maximum number of physical
drives (using all four ports)
Maximum number of logical
drives
Maximum size of a logical drive
SAS transfer rate
Spare battery part number
Time required to recharge
battery
Duration of battery backup
Battery life expectancy
Cache size
For more information about the controller features and specifications, and for information about system
requirements, refer to the HP website (http://www.hp.com/products/smartarray).
31.1 cm × 11.1 cm × 1.2 cm (12.3 in × 4.4 in × 0.5 in)
3 Gb/s SAS or 1.5 Gb/s SATA
Approximately 25 W
Operating, 10° to 55°C (50° to 131°F)
Storage, -30° to 60°C (-22° to 140°F)
Operating, 10% to 90%
Storage, 5% to 90%
0, 1, 1+0, and 5; also 6 if the batteries are used
PCIe x8
Up to 2 GB/s in each direction
Two internal, two external; each port has four 1x links
108 (8 can be connected internally, and a further 100 can be
connected externally by using expanders)
32
More than 2 TB
Up to 1.2 GB/s per port in each direction
398648-001
From 15 minutes to 2 hours, depending on the initial battery charge
level
More than 2 days if the batteries are fully charged and less than 3
years old
More than 3 years
512 MB (48 MB is used by the onboard processor)
Hardware features 6