Kenwood im280 Instruction Manual page 5

important
Do not use metal utensils to
l
remove mix from the bowl.
Do not remove the freezer bowl
l
from the freezer until ready to
make ice cream.
hints
We suggest that you keep the
l
freezer bowl in the freezer so that it
is ready for use. Place in a plastic
bag before freezing. Freeze the
bowl in the upright position.
Always make sure the freezer bowl
l
is thoroughly dry before placing in
the freezer.
Do not puncture or heat the freezer
l
bowl.
The freezer bowl should be placed
l
in a freezer that is operating at a
temperature of -18°C or below for
24 hours before use.
For best results always refrigerate
l
the ingredients before making ice
cream.
The addition of alcohol to recipes
l
inhibits the freezing process.
cleaning
Always switch off, unplug and
l
dismantle before cleaning.
Never put the power unit in water
l
or let the cord or plug get wet.
Don't wash parts in the dishwasher
l
freezer bowl
Remove the freezer bowl from the
l
outer bowl.
Allow the freezer bowl to reach
l
room temperature before
attempting to clean.
1 Wash the inside of the bowl, then
dry thoroughly. Do not immerse in
water.
paddle, outer bowl
Remove the paddle from the
l
power unit.
1 Wash then dry thoroughly.
lid
Press the power unit release lever
l
to separate the lid from the power
unit 1.
1 Wash the lid then dry thoroughly.
power unit
Wipe with a damp cloth, then dry.
l
service and customer
care
If you experience any
l
problems with the operation
of your appliance, before
requesting assistance visit
www.kenwoodworld.com.
Please note that your product
l
is covered by a warranty, which
complies with all legal provisions
concerning any existing warranty
and consumer rights in the country
where the product was purchased.
If your Kenwood product
l
malfunctions or you find any
defects, please send it or bring
it to an authorised KENWOOD
Service Centre. To find up to date
details of your nearest authorised
KENWOOD Service centre visit
www.kenwoodworld.com or the
website specific to your Country.
Designed and engineered by
l
Kenwood in the UK.
Made in China.
l
5