Panasonic AG-MX70 Operating Instructions Manual page 25

[Video Effects] setting screen
[Mosaic] setting
Select [On] or [Off] for this effect using the rotary 2 control.
The default setting is [Off].
Select [XY] (both horizontal and vertical), [X] (horizontal
only) or [Y] (vertical only) using the rotary 3 control.
Set the size using the rotary 4 control. Any setting from 0 to
30 can be set for Size, and the setting can be changed in 2-
step increments. The default setting is 8.
This level setting is used for the level of transition numbers
1001, 1002 and 1003 (200, 201 and 202).
[Defocus] setting
Select [On] or [Off] for this effect using the rotary 2 control.
The default setting is [Off].
Select level 0 to 7 using the rotary 3 control. The default
setting is 2.
This level setting is used for the level of transition number
1004 (203). It cannot be made to take effect at the same
time as a 2-dimensionally compressed pattern.
<Note>
Either [Mosaic] or [Defocus] can be selected. The effect selected last takes precedence, and the previously selected effect is
canceled.
[Mono] (monochrome) setting
Select [On] or [Off] for this effect using the rotary 2 control.
The default setting is [Off].
This effect takes precedence over the setting initiated by
[Color Effects].
R1 R2
Mosaic
Off
R1 R2
Defocus
Off
R1 R2
Mono
Off
On
Off
25
R3 R4 R5
Size
XY 8
0 - 30
X
Y
XY
R3 R4 R5
Level
2
0 - 7
R3 R4 R5