Panasonic AG-MX70 Operating Instructions Manual page 16

Parts and their functions
L
1
1
Analog audio 1 input connectors
The audio signals supplied to these connectors are input
to the cross point selected on the initial setting page.
2 Analog audio 2 input connectors
The audio signals supplied to these connectors are input
to the cross point selected on the initial setting page.
3 Analog audio 3 input connectors
The audio signals supplied to these connectors are input
to the cross point selected on the initial setting page.
1
EDITOR interface connector (9-pin)
This connector is used to connect the unit with an RS-
422A or RS-232C controller.
2 RS-422A/RS-232C selector switch
This is used to switch between the RS-422A and RS-
232C control protocols.
3 SIGNAL GND (ground) terminal
AUDIO IN
L L
R R
1 2
2
O
1
1
4
2
AUDIO OUT 1
L
R R
3
3 4
4
Analog audio 4 input connectors
The audio signals supplied to these connectors are input
to the cross point selected on the initial setting page.
5
Analog audio output connectors
2
EDITOR
RS422 SIGNAL
GND
3
RS232C
TALLY
~AC IN
5
R
4 TALLY output connector
The rear panel tally is for the cross point 1, 2, 3, 4, 5, 6, 7
or 8 output.
The connector used by the cross point is turned ON.
5 AC IN power socket
16
AUDIO OUT 1
L R
4
5