Enabling And Disabling Parksense - Dodge Challenger SRT 2016 Owner's Manual

194 UNDERSTANDING THE FEATURES OF YOUR VEHICLE

Enabling And Disabling ParkSense

ParkSense can be enabled and disabled with the
ParkSense switch, located on the switch panel below the
Uconnect display.
ParkSense Switch
When the ParkSense system is disabled, the
Drivers Information Display (DID) will display
the "PARKSENSE OFF" message for approxi-
mately five seconds. Refer to "Drivers Informa-
tion Display (DID)" in "Understanding Your Instrument
Panel" for further information. When the gear selector is
moved to REVERSE and the system is disabled, the DID
will display the "PARKSENSE OFF" message for as long
as the vehicle is in REVERSE.
The ParkSense switch LED will be ON when ParkSense is
disabled or defective. The ParkSense switch LED will be
OFF when the system is enabled. If the ParkSense switch
is pushed and the system is disabled or requires service,
the ParkSense switch LED will blink momentarily and
then the LED will be ON.