Advertisement
4 – Maestro Plus ice machine mounting accessories
Optional wall mount bracket
26.25"
(66.7 cm)
Important specifier notes:
1. For secure wall mounting, specify optional wall mount bracket.
2. Wall and fasteners must support the weight of the ice
machine, bracket, supply water and ice. Use of a backing board
may be required with hollow wall construction.
3. Machine stand mounting adds 6.80" (17.27 cm) to height of
ice machine.
5 – Maestro Plus ice tube runs – specifier guidelines
Long tube runs for RIDE remote ice delivery equipment
beverage
dispenser
minimum of
6.00." (15.24 cm)
turn/corner
ice transport tube –
1 3/16" OD,
2 1/8" OD with
insulation
Self-contained 425 series RIDE ice machine
Optional machine stand
18.125"
(46.0 cm)
20.125"
(51.1 cm)
A - 15.125" (38.4 cm)
B - 18.625" (47.3 cm)
support
maximum
straps
2 ft (61.0 cm)
radius
transport tube slope
(toward ice machine)
1/4"
1'
(2 cm per meter)
6.80"
(17.27 cm)
A
C
D
B
C - 13.25" (33.6 cm)
D - 20.75" (52.7 cm)
4. No dips in tube routing allowed.
5. Ice transport tube needs minimum 1/4" per foot (2 cm per
meter) pitch toward ice machine and should be secured to
prevent dips and traps from forming.
wall-mounted
ice machine
Optional slide out accessory
front view
14.00"
(35.6 cm)
13.00"
(33.1 cm)
12.75"
(32.4 cm)
14.00"
(35.6 cm)
slide-out-track
top view
22.75"
(57.8 cm)
Icemaker Front
16.00"
1.563"
(4.0 cm)
(40.7 cm)
19.25"
(48.9 cm)
25.875"
(65.8 cm)
Important specifier notes:
1. 20' (6 m) maximum ice transport
tube run.
2. Tubing routing bends must have a
6.00" (15.24 cm) radius or larger.
3. If not supported from underneath,
secure insulated ice transport tube
at least every 2' (61.0 cm) to prevent
dips or traps.
4. Relative humidity levels above 80%
in areas where the ice machine or
ice transport tube are located may
produce excessive condensation that
will cause water damage.
5. Contact factory for
recommendations on running
tubing through a decorative soffit
or chase.
verical utility panel
1.563"
(4.0 cm)
7
Form# 6695
Advertisement
