Advertisement
1 – Locating the ice machine
Maestro Plus self-contained Chewblet ice machines with RIDE technology allow mounting in a base cabinet, on a wall or
on a floor stand up to 20' (6 m) from the dispenser or ice bin. In-cabinet mounting requires special attention to service
access, unit ventilation and ice tube runs.
RIDE model – ice and beverage
dispensers (by others)
Important specifier notes:
1. Dispenser must be compatible with
nugget ice. Compatible dispensers
include Cornelius DF/ED300BC,
DB/DF/ED, 150 BC, 175 BC, 200 BC,
250 BC, 300 BC, IDC215/255,
FlavorFusion/Overload, Lancer
4500-22N, 4500-30N, FS16N, FS30N,
FS44N, Servend MD150/175/200/250,
MDH302/402, SV175/200/250 and
Coca-Cola Freestyle.
2. Ice enters through the top of the ice
and beverage dispenser. Contact factory
for side entry.
3. Top kit MSF30SC required with Coca-
Cola Freestyle 7000. Adapter 0002832
must also be ordered from Coca-Cola.
4. RIDE application is approved only for
Pepsi Spire 3.0 and 5.0 designed for
top mount ice machines and requires
MSP24SC for 3.0 and MSP30SC for
5.0, ordered separately. For manual
fill versions of Pepsi Spire 3.0 and 5.0,
contact factory.
Self-contained 425 series RIDE ice machine
RIDE model – Follett low-profile
Vision ice and beverage dispensers
Important specifier notes:
1. See pages 4-6 for critical clearance and
venting requirements.
RIDE model – Follett ice storage bins
Important specifier notes:
1. See form# B300 for bin sizing.
2. Locate floor sink or grate and drains in
front of storage bin.
3. Do not position bin drain lines to block
Ice•DevIce
bin cart.
™
3
Form# 6695
Advertisement
