Advertisement
3 – Undercounter/in-cabinet mounting and ventilation
Using Follett supplied grilles
Maestro Plus ice machines can be installed undercounter/in-cabinet to fill bins or dispensers using RIDE technology. Care must be
taken to ensure proper cabinet venting to avoid recirculation of hot air. Improper venting can cause ice machine outages.
exhaust
cabinet door
supplied air
intake grille
Important specifier notes for using Follett supplied grilles:
1. The supplied exhaust grille must be located at least
18.00" (45.7 cm) from the supplied air intake grille (exhaust air
must not recirculate with intake air).
2. Cabinet interior must be open to allow for unrestricted
exhaust air flow.
3. Ice transport tube needs minimum 1/4" per foot
(2 cm per meter) pitch toward ice machine and should be
secured to prevent dips and traps from forming.
Self-contained 425 series RIDE ice machine
Supplied
grilles
18.00" (45.7 cm)
minimum
22.75" (57.8 cm)
minimum
29.00"
(73.7 cm)
minimum
air in
Cabinet door
must mate directly
to air intake gasket
air intake gasket
door & gasket
must mate
directly
cutout for supplied air intake grille
12.00"W x 12.00"H (30.5 cm x 30.5 cm)
Maestro Plus
ice machine
electric
water
drain
4. Cabinet door must mate directly to air intake gasket.
5. Cabinet interior must provide a minimum clear space of
22.75" deep (57.8 cm) by 29.00" high (73.7 cm).
6. Supplied grilles must meet minimum requirements for open air
space shown above.
7. Utilities should be conveniently located as shown.
Ice transport tube
minimum 1/4" per foot
(2 cm per meter)
pitch toward ice machine
secure to prevent dips
and traps from forming
completed installation with
gasket and door in place
side view
22.75" (57.8 cm)
drain tube
A: additional 3" (7.6 cm) required if
receptacle located directly behind unit.
A
29.00"
(73.7 cm)
minimum
5
Form# 6695
Advertisement
