Subaru 2016 Legacy Owner's Manual page 43

! BSD/RCTA (if equipped)
After entering the "BSD/RCTA" menu,
select the "Warning Volume" menu. You
can set the volume of the warning buzzer
for RCTA (Rear Cross Traffic Alert). You
can select "Max", "Mid" or "Min".
! Vehicle Setting
After entering the "Vehicle Setting" menu,
select one of the following menus.
! Keyless Entry System
After entering the "Keyless Entry System"
menu, select one of the following menus.
. Audible Signal (models with "key-
less access with push-button start
system"):
The audible signal can be activated or
deactivated. Select "On" to activate. Se-
lect "Off" to deactivate.
. Hazard Warning Flasher (all mod-
els):
The hazard warning flasher operation can
be activated or deactivated. Select "On" to
activate. Select "Off" to deactivate.
. Driver Door Unlock (models with
"keyless access with push-button start
system"):
The door unlock selection function is
available for the "keyless access" entry
function. For details, refer to "Door unlock
selection function" F2-17. On this setting
menu, the door unlock selection function
for the driver's door can be customized.
Select "Driver Door Only" to set as
"Operational". Select "All" to set as "Non-
operational".
. Rear Gate Unlock (Outback with
"keyless access with push-button start
system"):
The door unlock selection function is
available for the "keyless access" entry
function. For details, refer to "Door unlock
selection function" F2-17. On this setting
menu, the door unlock selection function
for the rear gate can be customized.
Select "Rear Gate Only" to set as "Opera-
tional". Select "All" to set as "Non-opera-
tional".
! Defogger
The defogger and deicer system can be
set for the continuous operation mode or
automatic shut-off mode. Select "Contin-
uous" to select the continuous operation
mode. Select "15 minutes" to select the
Instruments and controls/Multi information display
automatic shut-off mode.
! Interior Light
The setting for the period of time in which
the interior lights remain on (OFF delay
timer) after closing the doors and/or the
rear gate can be set or customized. Select
the preferred seconds to customize the
operation period. Select "Off" to deactivate
the OFF delay timer.
! Auto Headlights
. Light Sensitivity:
The operational sensitivity of the auto on/
off headlights can be set. You can select
"Max", "Mid", "Low" or "Min".
. Wiper Link:
The automatic headlight turn on function
that is linked with the wiper operation can
be activated or deactivated. Select "On" to
activate. Select "Off" to deactivate.
! Welcome Lighting
After entering the "Welcome Lighting"
menu, select either of the following me-
nus.
. Approaching Time Set:
The setting for the period of time in which
the low beam headlights remain on when
approaching the vehicle can be set or
customized. Select the preferred seconds
3-43
– CONTINUED –