Outside Temperature Indicator; Multi Information Display - Subaru 2016 Legacy Owner's Manual

3-34
Instruments and controls/Multi information display
& Outside temperature indica-
tor
1) U.S. spec. models
2) Except U.S. spec. models
The outside temperature indicator shows
the outside temperature in a range from
−22 to 1228F (−30 to 508C).
The indicator can give a false reading
under any of the following conditions:
. When there is too much sun.
. During idling; while running at low
speeds in a traffic jam; when the engine
is restarted immediately following a shut-
down.
. When the actual outside temperature
falls outside the specified indicator range.

Multi information display

WARNING
Always pay adequate attention to
safe driving when operating the
multi information display while the
vehicle is in motion. When operation
of the multi information display
interferes with your ability to con-
centrate on driving, stop the vehicle
before performing operations on the
screen. Also, do not concentrate on
the display while driving. Doing so
may cause you to look away from
the road and could result in an
accident.
Various information will be shown on the
multi information display. Also, a warning
message will appear on the display if a
malfunction, etc. is detected. In addition,
several settings for the displayed content
can be performed.
Multi information display
ECO gauge (refer to "ECO gauge" F3-
1)
11.)
2) Basic screen/Warning screen (refer to
"Basic screens" F3-36 and "Warning
screen" F3-36.)
3) Cruise control information display
4) Select lever/gear position indicator (refer