Allen-Bradley PowerFlex 753 Quick Start Manual page 39

Table 8 - Control Screen Navigation/Number Keys
Label Key
JOG
REF
HELP
REV
EDIT REF
FWD
REMOVE HIM
REF
MANUAL
Table 9 - Start and Stop Keys
Single-function Key Name
Start
Stop
Function
Jogs the host drive.
Decreases the speed reference for the host drive.
Displays Rockwell Automation Drives Technical Support direct phone number, website address, and email address.
Sets the direction to reverse for the host drive.
Enables direct data entry of the speed reference for the host drive.
Sets the direction to forward for the host drive.
Allows HIM removal without causing a fault if the HIM is not the last controlling device. (The REMOVE HIM label is not available
when the HIM has manual control of the host drive. In this case, a fault occurs if the HIM is removed.)
Increases the speed reference for the host drive.
Switches between Auto and Manual modes.
Function
Starts the drive.
• Stops the drive or clears a fault.
• This key is always active.
• This key is controlled by drive parameter 307 [Start Stop Mode].
Rockwell Automation Publication 750-QS001A-EN-P - March 2015
Reference Section
39