Jarv JRV-TW800 User Manual page 8

Once each earbud has successfully been paired to your device, the
LED indicator will slowly flash Blue confirming your Bluetooth
connection and your phone should show a connection to each
of the earbuds (L+R) separately.
Please note you must now Pair the earbuds to each other.
PAIRING YOUR EARBUDS TO EACH OTHER FOR TRUE WIRELESS
SOUND (TWS)
1. Press and hold down the button marked TWS for approximately
8-9 seconds until the red and blue LED light flash alternately which
indicates that you are in pairing mode. This process needs to be
done separately for each earbud (Left and Right).
Once both earbuds are successfully paired to each other you will
hear a beeping sound confirming the True Wireless pairing.
Pairing
TWS
PRESS & HOLD
L R
8-9seconds
NOTE: In the event that you cannot get the earbuds to pair properly,
please delete the devices from your Bluetooth connection and begin
at Step 1.
8