Timer Recording; Using G- Code System - Panasonic DIGA DMR-ES30V Operating Instructions Manual

Recording
VHS
Numeric
buttons
DIRECT NAVIGATOR
3, 4, 2, 1
ENTER
PROG/CHECK
REC MODE

Timer Recording

You can enter up to 16 programmes a month in advance.
Preparation
≥Select the unit viewing channel (e.g. AV input) on the TV.
≥Check that the clock is set to the correct time. If it has not been set,
set it (l 46).
≥Insert a video cassette with an intact accidental erasure prevention
tab. (l 48)
≥Press [VHS].
52
VQT0P03
DVD/ VHS
TV
VOLUME
CH
INPUT SELECT
AV
OPERATION
VHS VHS DVD
SELECT
TRACKING/V-LOCK
AUDIO
CANCEL/RESET CANCEL
G-Code G-Code
G-Code
SLOW/
SKIP/ INDEX REW SEARCH FF
PLAY
FUNCTIONS
TOP MENU
SUB MENU RETURN
S
TIME SLIP
PROG/CHECK PROG/CHECK DISPLAY STATUS JET REW
REC REC MODE REC MODE DVD ERASE TIMER TIMER
CREATE
DUBBING CHAPTER F Rec
VHS DVD
∫ Using G-
system
CODE
®
Entering the G- numbers is an easy way of timer recording.
CODE
You can find these numbers in TV listings in newspapers and
magazines.
[1]
Press [G-Code].
[2]
Press the numeric buttons to enter the G-
number.
≥Press [2] to move back to correct a digit.
[3]
Press [ENTER].
≥ Confirm the programme and correct it if necessary using [3,
4, 2, 1]. (Manual programming l 53, step 3)
≥
(Recording mode) (l 51)
SP,.LP,.EP,.A°
^--------------------------J
° Recording mode Auto Change Function (l 53)
You can also press [REC MODE] to change the recording
mode.
≥If "-- -----" appears under "Name", press [3, 4] to select a
desired programme position.
After you have entered the information of a TV station, it is kept
in the unit's memory.
≥"Invalid entry" is displayed when you enter the wrong G-
number. Re-enter the G-
CODE
[4]
If the programme is correct
Press [ENTER].
≥Repeat steps 1–4 to programme other recordings.
[5]
Press [ , TIMER].
≥"
" lights on the VHS unit's display.
The timer recording standby mode is activated on VHS.
However, the unit may not be turned off automatically.
≥You can play or record any media on DVD even if the timer
recording standby mode is activated on VHS.
≥Timer recording can be started whether the unit is turned on or off.
[6]
Turn the unit off when you do not play or record
on DVD.
≥If the timer recording is started with keeping the unit turned on,
the unit is not turned off automatically even after the timer
recording is completed. You can turn the unit off during timer
recording.
∫ To release the unit from recording standby
Press [ , TIMER].
" " goes out.
≥Be sure to press [
, TIMER] before the programme start time to
put the unit on recording standby. Timer recording will work only if
" " is displayed.
∫ To cancel recording when recording has already
begun
Press [ , TIMER].
≥You can also press and hold [∫] on the VHS main unit for more
than 3 seconds to stop recording.
Note
Refer to Note in Manual programming (l 53).
VHS
G-code
- - - - - - - - -
CODE
Timer recording
1/3
Name Date Start Stop
1 01 20.7 10:00 11:00 SP
- - - - - - - - - . - - - - : - - - - : - - -
- - - - - - - - - . - - - - : - - - - : - - -
CODE
number.