S-Vhs Quasi Playback (Sqpb); Repeat Playback; Playing A Tape With High Image Quality; Adjusting The Playback Picture - Panasonic DIGA DMR-ES30V Operating Instructions Manual

Playback
INPUT SELECT
AV
VHS
Numeric
buttons
∫
REC MODE
µ
Preparation
≥Press [VHS].

S-VHS Quasi Playback (SQPB)

It is also possible to play back tapes recorded in the S-VHS system.
≥Some picture noise may occur depending on the type of tape used.
≥It is not possible to fully obtain the high resolution that S-VHS is
capable of.
≥It is not possible to record in the S-VHS system with the unit.

Repeat Playback

During play or while stopped
Keep pressing [1, PLAY] for about 5 or
more seconds.
≥The "RP" indication appears on the unit's display.
≥At the end of the programme, the tape rewinds to
the beginning of the programme and plays it again
(it only works if there is at least 5 seconds blank space at the end of
the programme). This repeats until you cancel it.
≥Depending on tape, this function may not work.
∫ To restart normal playback
Press [1, PLAY].
∫ To stop play
Press [∫, STOP].
50
VQT0P03
DVD/ VHS
TV TV CH, W, X
VOLUME
CH CH
INPUT SELECT INPUT SELECT
AV AV
OPERATION
DVD
VHS VHS DVD DVD
SELECT
TRACKING/V-LOCK TRACKING/V-LOCK
TRACKING/
V-LOCK, r, s
CH, W, X
AUDIO
CANCEL/RESET
G-Code
SLOW/
SKIP/ INDEX
REW SEARCH FF
PLAY PLAY
1
;
DIRECT NAVIGATOR FUNCTIONS
TOP MENU
SUB MENU RETURN
S
TIME SLIP
PROG/CHECK DISPLAY STATUS STATUS JET REW
STATUS
REC REC REC MODE REC MODE DVD ERASE TIMER
CREATE
DUBBING CHAPTER F Rec
VHS DVD
A B C

Playing a tape with high image quality

With the TP channel, you can play a tape with high image quality on
a TV compatible with progressive output.
Preparation
≥Connect to the TV's component video input terminals (l 15).
≥Set the output (l 18).
[1]
Press [DVD].
[2] Press [INPUT SELECT] or [CH, W, X] to select
the "TP" channel.
≥About TP channel (l 59)
[3]
Press [VHS] and press [1, PLAY].
≥Playing the tape with high image quality is initiated.
Note
≥The picture may not be displayed correctly when playing NTSC
tapes.

Adjusting the playback picture

∫ Manual tracking

The unit usually makes tracking adjustments, but you may need to
do it manually if noise appears on a tape recorded on other
equipment.
During play
Keep pressing [TRACKING/V-LOCK, r] or
[TRACKING/V-LOCK, s] until the noise bars
disappear.
≥If the noise bars appear during still playback, switch the VHS over
to the slow playback mode and then adjust the tracking.

∫ Vertical locking adjustment

If the still picture shakes, perform the following operation.
While paused
Keep pressing [TRACKING/V-LOCK, r] or
[TRACKING/V-LOCK, s] until the picture stops
shaking.
∫ To return to auto tracking
Press both [TRACKING/V-LOCK, r] and [TRACKING/V-LOCK, s]
simultaneously.
∫ To remove the noise from a paused picture
Start slow play, then adjust the tracking.
Note
≥This function may not work with some TV models and tapes.
≥You can also adjust the tracking and vertical synchronization with
[CH, W, X] on the VHS side of the main unit.
VHS