95 User Manual 1 Introduction 1.1 Appearance of iData 95 Figure 1-1 Front view of iData 95W Figure 1-2 Front view of iData 95V Figure 1-3 Rear view of iData 95 - 1 -...
95 User Manual 1.2 Installing an SD Card To install an SD card, do as follows: 1. Push the card cover along the direction marked on the cover and open the cover. 2. Insert an SD card. 3. Press the SD card downward and lock the card along the IN direction marked on the cover.
95 User Manual 1.3 Installing a SIM Card To install a SIM card, do as follows: 1. Insert a SIM card along the direction, as shown in Figure 1-4. 2. Press the card cover downward. 3. Push the SIM card along the LOCK direction to lock the card cover.
95 User Manual Figure 1-5 Installing a battery 1.5 Disassembling the Battery Cover To disassemble the battery cover, do as follows: 1. Insert your left forefinger into the upper left part of the battery cover and push the lock to the left by using the thumb.
Always connect the iData 95 to the AC power supply when you do not use it. In settings, set the time to sleep to a smaller value for the iData 95 by selecting Home > Applications > Settings > Display > Screen Delay.
2 Instructions on the iData 95 2.1 Power-on and Power-off After installing a SIM card and a battery and fully charging the iData 95, you can use the iData 95. 1. To power on the iData 95, press and hold the On/Off key for some time.
Home key Menu key Return key 2.4 Home The iData 95 has five home pages. Slide to the left or right to switch among the pages. Click any application on the home page to start the application. Application tray ★ Tips ...
Connect to Pea ★ Note The applications of the iData 95 are often upgraded. Therefore, the status icons may be different from those on the iData 95. The actual status icons prevail. 2.6 Basic Settings 2.6.1 Date and Time Setting...
Page 11
95 User Manual 2.6.2 Display Settings Find the following icon: Select Settings > Display and set display options such as Brightness, Wallpaper, Auto-rotate screen, and Font size. 2.6.3 Ringtone Setting Select Settings > Audio Profiles and click General/Silent/Meeting/Outdoor to set the ringtone in the corresponding mode.
Page 12
95 User Manual 2.6.4 Security Setting Select Settings > Reset > Factory date reset. Click Clear all. The iData 95 starts to restore the factory settings. ★ Caution This operation will clear the following data in the iData 95: ...
Page 13
Click Default and select the desired input in the list. 2.6.6 Shortcuts You can add shortcut icons on the home page of the iData 95. On the home page, click the application tray icon, select and drag the icon to be added to the home page.
95 User Manual 3 Call Function 3.1 Making a Call Find the following icon: 1. Enter a telephone number by pressing number keys. Click 3. Click to terminate the call. Contact Call record Voice call Virtual numeric keypad 3.2 Contacts Find the following icon: 1.
95 User Manual 3.3 SMS and MMS Find the following icon: 1. Click and enter the message recipient and the text to be sent. 2. Click to send the message. 3. On the message editing page, press the menu key to open the menu and click Add Subject.
You can send or receive emails. ★ Note To create an email account on the iData 95, you need to set the account on a PC. For example, to create a QQ email account, log in to the QQ mailbox, click Settings in the upper right corner of the mailbox to access the account options.
Page 17
95 User Manual To delete an account, do as follows: 1. On the mailbox page, press the menu key and click Settings. 2. Click the email account to be deleted and access the setting page. 3. Click Remove account.
95 User Manual 4. Network and Connection Synchronization 4.1 Data Connection By default, the network is configured for the device upon delivery. If you delete the network configuration by mistake, you can manually select a network through software configuration.
Page 19
After a GPRS data connection is established, you can access the Internet. To establish a GPRS data connection, ensure that a SIM card is installed in the iData 95. Generally, the iData 95 has configured Internet access. If you delete the default configuration by mistake, set the network as follows (assume that China Mobile’s network is...
4.3 GPS The iData 95 is equipped with a high-performance navigation chip and can obtain position information quickly and accurately. The manufacturer of the iData 95, Wuxi iData Technology Company Ltd., provides GPS Test, which is a GPS demonstration program.
95 User Manual 4.4 Connecting iData 95 to a Computer Connect the iData 95 to a computer by using a USB cable so that files in the memory card, for example, pictures, videos, and music, can be transferred to the computer and processed in the computer.
95 User Manual 4.5 Synchronization Select Settings > Accounts & sync. 1. Click ADD ACCOUNT to set a new account. 2. Click Company or Email, enter the email address and password, and click Next. Wait until the connection is completed (for details about mailbox settings, see section 3.4 Email).
First of all, install iScan on the iData 95 (for details on how to install iScan, see 6.1 Installing Software). After iScan is installed, the iScan icon is displayed on the application page. Click the icon to start the software (by default, Barcode Scan is selected).
2. Download software installation packages, store them on the SD card, and install the software by using file manager. 3. Connect the iData 95 to a computer by using the USB cable and install software on the computer. First of all, install software such as APK installer, pea, or 91 mobile assistant on the computer so that software can be installed in batches.
95 User Manual 6.3 Managing Applications Press the menu key (yellow scan key) and click Manage apps. You can view the status of download applications, applications in the SD card, and running applications and click any application to access the application information page where you can stop, uninstall, or suspend the application.
Do not try to disassemble the iData 95. Otherwise, the iData 95 may be damaged. Do not touch the screen surface of the iData 95 by using a pen, a pencil or other sharp articles in case the screen may be scratched.
After being inactive for a period of time, the inactive state. iData 95 is closed. The iData 95 is closed. The battery is used up. Replace the battery. The iData 95 responds Too many files are stored in Remove unused memos and records. - 25 -...
Page 28
Too many applications are Remove applications installed on the iData installed on the iData 95. The scan application is not Load iScan in the iData 95. loaded. The iData 95 does not Reading a barcode fails. Check that the barcode is defective.
Page 29
95 User Manual Table 7-2 Cable troubleshooting Fault Cause Solution Charging fails. The cable is in poor Replace the cable. contact. synchronization The cable is in poor Replace the cable. software cannot contact. connected. Table 7-3 Wi-Fi connection troubleshooting...